The most important part of Daily Maintenance is to clean the drip tray.
If too much extract builds up it can clog the pod resulting in poor quality Ripples.
Tap the side menu, then tap "Clean drip tray" and follow the on screen instructions:
The pod housing moved forward so you can easily access the Drip Tray.
Lift the lid by sliding it back and open the front door panel.
Carefully reach up inside the Ripple Maker and remove the Drip Tray without spilling its contents.
Run the Drip Tray under boiling water or use paper towels to wipe away the coffee extract.
Place the Drip Tray back inside the Ripple Maker, please pay attention that you have placed the Drip tray in the correct position.
- Close the lid and the front door panel.