This article will discuss how to troubleshoot when your Ripple Maker is not printing and producing an Error 3.
Pod not found 
1. Make sure you have a pod inside the Ripple Maker.
2. Move your finger on the golden pins- Make sure they're all pops out and clean:
3. Make sure the pod holder (black part) didn't come apart:
4. Make sure the print card is not damaged / dirty:
If it is, please turn off the Ripple Maker and clean it gently with a dry paper towel.
5. Turn off and back on:
Press the power button until the white light turns off.
If the problem persists please contact Ripples' support- email@example.com or call your local support number.